In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it is really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak when you put the mask on. Make sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to make sure that you get a secure good flea collars for dogs fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it might look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are level and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you will have to do some sanding to be sure that it is safe on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.